Rear Camber Adjustment

Fig 1: Rear Camber Adjustment Nut And Bolt

Courtesy of GENERAL MOTORS COMPANY

NOTE:

The frame of the vehicle is slotted, turning the cam bolt will move the camber to the desired location.

Loosen the lower control arm-to-frame nut (1) enough to allow movement.
Rotate the lower control arm-to-frame bolt (2) in the direction necessary to the correct the camber measurement.
Snug the lower control arm-to-frame nut, do not Tighten at this time.
Re-inspect the rear camber specifications and adjust as necessary.
Hold the bolt and Tighten the lower control arm-to-frame nut. Refer to Lower Control Arm Replacement
Repeat the procedure for the other rear wheel.