Rear Toe Adjustment

Fig 1: Toe Link-To-Frame Nut And Bolt

Courtesy of GENERAL MOTORS COMPANY

NOTE:

The frame of the vehicle is slotted, turning the cam bolt will move the toe to the desired location.

Loosen the toe link-to-frame nut (1) enough to allow movement.
Rotate the toe link-to-frame bolt (2) in the direction necessary to the correct the toe measurement.
Snug the toe link-to-frame nut, do not Tighten at this time.
Re-inspect the rear toe specifications and adjust as necessary.
Hold the bolt and Tighten the toe link-to-frame nut. Refer to Adjust Link Replacement
Repeat the procedure for the other rear wheel.