Removal & Installation

Applies To	Note	Standard Hours	Skill Level
2.5L Eng,FWD	Includes: Confirm Fluid temperature for level check. Includes: R&I Suspension Crossmember Assembly. DOES NOT include wheel alignment.	12.3	C
Combination Procedure: CONVERTER: Drain & Test:
		0.2	C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
2.5L Eng, Rear		0.4	B
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.2	C
Combination Procedure: OUTPUT SHAFT SEAL: Remove & Replace:
Each		0.2	B
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
		0.1	C
Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace:
		0.2	B
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
	Includes: Programming.	0.8	C
Combination Procedure: TRANSMISSION OIL COOLER & LINES: Flush: Includes: Inspect for leaks and fluid flow test.
		0.5	C