Side Obstacle Detection Control Module Replacement

WARNING: This page is about a different car, the 2021 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure REAR BUMPER FASCIA REMOVAL AND INSTALLATION
1	Side Object Sensing Alert Module Bolt CAUTION: Fastener Caution Tighten 2.5 N.m (22 lb in)
2	Side Object Sensing Alert Module Procedure Disconnect the electrical connectors. Perform the necessary programming and setup procedure: Control Module References

Callout

Component Name

Preliminary Procedure
REAR BUMPER FASCIA REMOVAL AND INSTALLATION

Side Object Sensing Alert Module Bolt

CAUTION:

Fastener Caution

Tighten
2.5 N.m (22 lb in)

Side Object Sensing Alert Module

Procedure

Disconnect the electrical connectors.
Perform the necessary programming and setup procedure: Control Module References