Rear Gate Module Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Liftgate Lower Trim Finish Panel Replacement
1	Accessory and Liftgate Control Module Procedure Disconnect the electrical connectors. Use a plastic trim tool if necessary. Perform the necessary programming and setup procedure: Control Module References

Callout

Component Name

Accessory and Liftgate Control Module

Procedure

Disconnect the electrical connectors.
Use a plastic trim tool if necessary.
Perform the necessary programming and setup procedure: Control Module References