Installation Procedure

Electronic Brake and Traction Control Module Bracket - Install - Electronic Brake and Traction Control Module Bracket Replacement
Electronic Brake Control Module with Brake Pressure Modulator Valve Assembly (1) - Install

Courtesy of GENERAL MOTORS COMPANY
Brake Pressure Modulator Valve Bracket Bolt (1) - Install and tighten 22 N.m (16 lb ft)

Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution
Remove the cap from the brake pipe fitting and the plug from the BPMV outlet port.
Left Rear Brake Pipe Fitting (1) - Install and tighten 18 N.m (13 lb ft)

Courtesy of GENERAL MOTORS COMPANY
Remove the cap from the brake pipe fitting and the plug from the BPMV outlet port.
Right Rear Brake Pipe Fitting (1) - Install and tighten 18 N.m (13 lb ft)

Courtesy of GENERAL MOTORS COMPANY
Remove the cap from the brake pipe fitting and the plug from the BPMV outlet port.
Right Front Brake Pipe Fitting (1) - Install and tighten 18 N.m (13 lb ft)

Courtesy of GENERAL MOTORS COMPANY
Remove the cap from the brake pipe fitting and the plug from the BPMV outlet port.
Left Front Brake Pipe Fitting (1) - Install and tighten 18 N.m (13 lb ft)

Courtesy of GENERAL MOTORS COMPANY
Connect the EBCM electrical connector.
Brake Pressure Modulator Valve Master Cylinder Reservoir Rear Pipe - Install - Brake Pressure Modulator Valve Master Cylinder Reservoir Rear Pipe Replacement
Brake Pressure Modulator Valve Master Cylinder Reservoir Front Pipe - Install - Brake Pressure Modulator Valve Master Cylinder Reservoir Front Pipe Replacement
Reposition and install the radiator surge tank. - Radiator Surge Tank Replacement (LCV) , or Radiator Surge Tank Replacement (LGX without C69) , or Radiator Surge Tank Replacement (LSY) , or Radiator Surge Tank Replacement (LGX with C69)
Bleed the brake system. Antilock Brake System Automated Bleed
Program the EBCM. Control Module References
Center the steering angle sensor. Steering Wheel Angle Sensor Centering