Installation Procedure
- Wheel Speed Sensor (1) - Install
- Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)CAUTION:
- Retainer (1) @ Strut Assembly - Secure
- Retainer (1) @ Wheelhouse - Secure
- Retainer (2) @ Strut Assembly - Secure
- Wheel Speed Sensor Harness Pass Through Grommet (1) - Secure
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation
- Lower the vehicle.
- Retainer (1) @ Strut Tower - Secure
- Wheel Speed Sensor Electrical Connector (1) - Connect
- Verify the repair is complete. Diagnostic Repair Verification