Transmission Assembly: Remove, Install, and Overhaul

Includes: Inspect and replace all necessary components, clean and check Converter, flush Oil Cooler Lines, adjust and road test.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Gas,4WD	Includes: Transmission Programming and Calibration of Learned Parameters. Includes: R&I Front Propeller Shaft. Includes: R&I Rear Propeller Shaft. Includes: R&I Transmission Support. Includes: R&I Transmission Mount. Includes: R&I Transfer Case Assembly. Includes: R&I Fender Liners. Includes: R&I Starter Assembly. Includes: R&I Catalytic Converter. Includes: Check and adjust Transmission Fluid level with fluid temperature within parameters.	20.2		A
Additional Procedure: TRANSMISSION ASSEMBLY: Remove, Install, and Overhaul:
Where Skid Plate interferes add		0.2		A
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Rear		0.5		B
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.3		C
Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul:
4WD		4.3		A
Combination Procedure: TRANSFER CASE ASSEMBLY: Replace:
4WD	Includes: Perform Relearn procedure.	0.5		C