Circuit/System Verification
- Engine ON.
- Verify that no other DTCs are set.
- If any other DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If no other DTCs are set
- If any other DTCs are set
- Verify the backup lamps turn ON when transmission is shifted into reverse.
- If the backup lamps do not turn ON
Refer to Backup Lamps Malfunction .
- Go to next step: If the backup lamps do turn ON
- If the backup lamps do not turn ON
- Clear DTCs
- Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
- If the DTC is set
Replace the K17 Electronic Brake Control Module.
- Go to next step: If the DTC is not set
- If the DTC is set
- All OK.