Engine Assembly: Remove, Install, and Overhaul
WARNING: This page is about the Yukon Denali, 3.0L Eng VIN T, 4WD, which is a different variant/trim than selected.
Includes: Replace Rings, Main and Rod Bearings, Camshaft(s), Crankshaft and Timing Components. Remove Cylinder ridge, burnish Cylinders, grind Valves and clean and test or replace Lifters.
Includes (where applicable): Adjust Valves. DOES NOT include Pin fit or rebore and align Rods. See machine operations.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.0L Eng,4WD, w/Air Suspension | Includes: R&I Wiper Link Assembly & Cowl Top Panel. Includes: R&I Fender Liners. Includes: R&I Front Bumper Cover and Headlamp Assemblies. DOES NOT include Headlamp adjustment. Includes: R&I Cooling Module. Includes: R&I Catalytic Converters. Includes: R&I Charge Air Cooler. Includes: R&I Alternator. Includes: R&I Starter Assembly. Includes: R&I Air Conditioning Compressor. Includes: R&I Air Cleaner. Includes: R&I Battery and Tray. Includes: Drain and refill Cooling System. Includes: Drain and refill Engine Oil. Includes: Perform Filter Life Monitor Reset procedure. DOES NOT include Air Conditioning System recover, evacuate and recharge. | 48.2 | A | |
| 3.0L Eng,4WD, w/o Air Suspension | Includes: R&I Wiper Link Assembly & Cowl Top Panel. Includes: R&I Fender Liners. Includes: R&I Front Bumper Cover and Headlamp Assemblies. DOES NOT include Headlamp adjustment. Includes: R&I Cooling Module. Includes: R&I Catalytic Converters. Includes: R&I Charge Air Cooler. Includes: R&I Alternator. Includes: R&I Starter Assembly. Includes: R&I Air Conditioning Compressor. Includes: R&I Air Cleaner. Includes: R&I Battery and Tray. Includes: Drain and refill Cooling System. Includes: Drain and refill Engine Oil. Includes: Perform Filter Life Monitor Reset procedure. DOES NOT include Air Conditioning System recover, evacuate and recharge. | 48.0 | A | |
| Additional Procedure: ENGINE ASSEMBLY: Remove, Install, and Overhaul: | ||||
| Where Skid Plate interferes add | 0.2 | A | ||
| Combination Procedure: CRANKSHAFT POSITION SENSOR: Reset: | ||||
| Crankshaft Position Variation Learn | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |
| Combination Procedure: FUEL INJECTION SYSTEM: Reset: | ||||
| 3.0L Eng, Fuel System Reset Procedure | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |
| Combination Procedure: FUEL INJECTOR: Program: | ||||
| 3.0L Eng, Fuel Injector Flow Rate Programming | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |