Grind Complete
WARNING: This page is about the Yukon Denali, 3.0L Eng VIN T, 4WD, which is a different variant/trim than selected.
Includes: Remove carbon, check surfaces for warpage, reface or replace Valves, resurface Valve Seats and clean Valve Guides. Adjust Valves (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.0L Eng,4WD, w/Air Suspension | Includes: R&I Wiper Link Assembly & Cowl Top Panel. Includes: R&I Front Bumper Cover and Headlamp Assemblies. DOES NOT include Headlamp adjustment. Includes: R&I Cooling Module. Includes: R&I Engine Assembly. Includes: R&I Charge Air Cooler. Includes: R&I Fuel Injectors. Includes: R&I Turbocharger. Includes: Drain and refill Cooling System. Includes: Drain and refill Engine Oil. Includes: Perform Filter Life Monitor Reset procedure. Includes: Check and adjust Transmission Fluid level with fluid temperature within parameters. Includes: Programming. DOES NOT include Air Conditioning System recover, evacuate and recharge. | 42.4 | A | |
| 3.0L Eng,4WD, w/o Air Suspension | Includes: R&I Wiper Link Assembly & Cowl Top Panel. Includes: R&I Front Bumper Cover and Headlamp Assemblies. DOES NOT include Headlamp adjustment. Includes: R&I Cooling Module. Includes: R&I Engine Assembly. Includes: R&I Charge Air Cooler. Includes: R&I Fuel Injectors. Includes: R&I Turbocharger. Includes: Drain and refill Cooling System. Includes: Drain and refill Engine Oil. Includes: Perform Filter Life Monitor Reset procedure. Includes: Check and adjust Transmission Fluid level with fluid temperature within parameters. Includes: Programming. DOES NOT include Air Conditioning System recover, evacuate and recharge. | 42.2 | A | |
| Additional Procedure: VALVE: Grind Complete: | ||||
| 3.0L Eng, Where Skid Plate interferes add | 0.2 | A | ||
| Combination Procedure: FUEL INJECTION SYSTEM: Reset: | ||||
| 3.0L Eng, Fuel System Reset Procedure | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |
| Combination Procedure: TURBOCHARGER BOOST PRESSURE: Reset: | ||||
| 3.0L Eng, Turbocharger Boost Control Initial Position Learn | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |
| Combination Procedure: VALVE LIFTERS (REMOVED): Clean: | ||||
| Each Additional | 0.1 | B | ||
| One | 0.2 | B | ||