LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2022 >> Acadia AT4 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K19 Suspension Control Module: Programming and Setup >> Replace and Program Control Module or Reprogram Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replace and Program Control Module or Reprogram Control Module

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K19 Suspension Control Module - Programming and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K19 Suspension Control Module - Configuration and follow the on-screen instructions.
  4. Clear DTCs.
  5. With a scan tool, perform the suspension system calibration procedure, if applicable.
scientia non olet · About LEMON Manuals