Removal Procedure
Insert a suitable flat-bladed plastic trim tool between the rear seat position center reading and courtesy lamp (1) and headlining rear trim panel (2).
- Separate the rear seat position center reading and courtesy lamp (1) from the headlining rear trim panel (2).
Pull downward to release the retaining tabs.
- Rear Seat Position Center Reading and Courtesy Lamp (1) - Remove
- Disconnect the electrical connector.
Use a flat-bladed plastic trim tool to release the retaining clips.
- Disconnect the wiring harness retainer.
- Headlining Rear Trim Panel (1) - Remove
Disconnect the electrical connector.
- Release the retaining tabs.
- UHF Low Energy Remote Control Access Sensor Transceiver (1) - Remove