Circuit/System Verification

Vehicle On
Verify DTC U019B, U049C is not set.
- If any of the DTCs are set
  Refer to: Diagnostic Trouble Code (DTC) List - Vehicle
- Go to next step: If none of the DTCs are set
Verify the scan tool parameter:
Battery Charger Enable Circuit Test Status = Passed
- If not the specified state
  Refer to: Circuit/System Testing
- Go to next step: If the specified state
Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
Verify that no DTCs are set.
- If any of the DTCs are set
  Refer to: Circuit/System Testing
- Go to next step: If none of the DTCs are set
All OK.