Circuit/System Verification
- Vehicle On
- Perform the scan tool control function: Battery Charger Coupler Lock - Open/Close
- Verify the scan tool parameter:
Battery Charger Coupler Lock = Locked & Unlocked
- Verify the physical Charge Port for lock and unlock actuation.
- If the lock does not actuate
Refer to: DTC P3013 or P3014
- If the parameter does not correctly report the state of the lock
Refer to: Circuit/System Testing
- Go to next step: If the lock actuates and the parameter reports the correct state
- If the lock does not actuate
- All OK.