Unsuccessful Programming Recovery

If programming a control module is not successful, perform the following procedure:

1. Verify the control module, data link connector and programming tool connections are secure and the tool software is up to date.
2. Perform the following SPS Programming function:

   K16/K16B Battery Energy Control Modules and follow the on-screen instructions.

3. Verify the control module programming is successful.
   • If the programming is not successful 
   1. Vehicle Off. Wait for greater than 1 min.
   2. Vehicle OnService Mode
   3. Perform the following SPS Programming function:

      K16/K16B Battery Energy Control Modules and follow the on-screen instructions.

      • If the programming is not successfulReplace the appropriate component: K16 Battery Energy Control Module or K16B Battery Energy Control Module 2
      • Go to next step: If the programming is successful
   4. All OK.
   • Go to next step: If the programming is successful 
4. All OK..