Reprogram Control Module

To reprogram an existing K16B Battery Energy Control Module 2, perform the following procedure:

1. Access the Service Programming System (SPS) and follow the on-screen instructions.
2. Perform the following SPS Programming function:
   NOTE:

   The K16 Battery Energy Control Module and K16B Battery Energy Control Module 2 must be programmed together.

   K16/K16B Battery Energy Control Modules and follow the on-screen instructions.

3. Clear DTCs after completing the Programming procedure.
4. Perform the following SPS function:
   1. Setup

      K16 Battery Energy Control Module and follow the on-screen instructions.

5. Clear DTCs.