Removal Procedure
Front Bumper Fascia (1) - Remove - Front Bumper Fascia Removal and Installation
Underbody Splash Shield Bolt- Upper (1) - Remove [6x]
- Underbody Splash Shield Bolt- Lower (2) - Remove [3x]
- Disconnect the electrical connector.
- Underbody Splash Shield (3) - Remove
Underbody Skid Rear Shield Bolt (1) - Remove [6x]
- High Voltage Battery Tray Reinforcement Bolt (2) - Remove
- Underbody Skid Shield (3) - Remove
Disconnect the electrical connectors. (1)
- Disengage the 4 wiring harness retainers.
- Steering Gear Bolt (3) - Remove [4x]
- Power Steering Control Module Wiring Harness (4) - Remove