Transmission Assembly: Remove, Install, and Overhaul

Includes: Inspect and replace all necessary components, clean and check Converter, flush Oil Cooler Lines, adjust and road test.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
2.7L Eng,Automatic Trans,4WD	Includes: Programming. Includes: R&I Transfer Case Assembly. Includes: Confirm Fluid temperature for level check.	18.5		A
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
2.7L Eng, Rear		0.5		B
Combination Procedure: FLYWHEEL: Remove & Replace:
2.7L Eng		0.3		C
Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul:
4WD		4.0		A
Combination Procedure: TRANSFER CASE ASSEMBLY: Replace:
4WD		0.3		C