Repair Procedures: Removal

[CVVT Oil Control Valve (Intake)] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Remove the intake manifold.

   (Refer to INTAKE & EXHAUST SYSTEM - 3.8L Engine Mechanical System )

3. Disconnect the CVVT oil control valve connector (A).
4. Remove the installation bolt (B), and then remove the valve from the engine.

   [Bank 1] 

   Courtesy of

   [Bank 2] 

   Courtesy of

[CVVT Oil Control Valve (Exhaust)] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the CVVT oil control valve connector (A).

   [Bank 1] 

   Courtesy of

   [Bank 2] 

   Courtesy of

3. Remove the cylinder head cover.

   (Refer to CYLINDER HEAD ASSEMBLY - 3.8L Engine Mechanical System )

4. Remove the installation bolt (A), and then remove the valve from the engine.

   [Bank 1] 

   Courtesy of

   [Bank 2] 

   Courtesy of