Repair Procedures: Installation
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur if the component drops. If the component drops, inspect it before installation.
CAUTION:
- Apply the engine oil to the O-ring.
CAUTION:
- Insert the sensor in the installation hole and be careful not to damage during installation.
CAUTION:
- Be careful not to damage the sensor housing and the connector.
- Be careful not to damage the O-ring.
- To install, reverse the removal procedure.
Camshaft position sensor installation bolt:
6.9 ~ 9.8N.m (0.7 ~ 1.0kgf.m, 5.1 ~ 7.2lb-ft)