Repair Procedures: Installation
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur if the component drops. If the component drops, inspect it before installation.
NOTE:
When cleaning the throttle body, clean the valve and carbon at the bore with the cloth wet with the cleaner.
CAUTION:
Do not spray the engine cleaner on the throttle body.
CAUTION:
Be careful that fingers or cloth are not caught in the valve.
When installing the throttle body, make sure that foreign materials do not enter the throttle body.
When installing the throttle body, make sure that foreign materials do not enter the throttle body.
- To install, reverse the removal procedure.
Electronic throttle body Installation bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)