LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air cleaner assembly.

    (Refer to INTAKE & EXHAUST SYSTEM - 3.8L Engine Mechanical System )

  3. Disconnect the engine coolant temperature sensor connector (A).
  4. Remove the water temperature sensor from the water temperature control assembly.
    CAUTION:
    • Note that engine coolant may leak out of the water temperature control assembly when removing the sensor.
G11355020Courtesy of
scientia non olet · About LEMON Manuals