LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G80 5.0 Ultimate >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Knock Sensor >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold.

    (Refer to INTAKE & EXHAUST SYSTEM - 5.0L Engine Mechanical System )

  3. Disconnect the knock sensor connector (A).

    [Bank 1] 

    G11336664

    [Bank 2] 

    G11336665
  4. Remove the cross over fuel pipe (A).
    G11336666
  5. Remove the installation bolt (A), and then remove the sensor from the cylinder block.
G11336667