Repair Procedures: Removal

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the cover (A).

Courtesy of
Disconnect the ECM connector (A), TCM connector (B) and IDB connector (C).

Courtesy of

Courtesy of
Remove the TCM & ECM & IDB after removing the bolts (A) and nut (B).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Courtesy of
Remove the TCM (B) after removing the nuts (A).

Courtesy of