LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

[Bank 1, 2/Sensor 1] 

  1. Turn the ignition switch OFF.
  2. Disconnect the HO2S connector.
  3. Measure resistance between the HO2S terminals 2 and 5.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "Specification "

[Bank 1, 2/Sensor 2] 

  1. Turn the ignition switch OFF.
  2. Disconnect the HO2S connector.
  3. Measure resistance between the HO2S terminals 3 and 4.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "Specification "

scientia non olet · About LEMON Manuals