Repair Procedures: Cleaning

Remove the ETC Module.
(Refer to Engine Control System - "REPAIR PROCEDURES ")
Keep the opening position of the ETC Module plate with the fixing jig.

Courtesy of HYUNDAI MOTOR AMERICA

Clean the contamination part of the throttle body with a soft and lint-free cloth dampened with cleanser to prevent foreign objects from going in.

Courtesy of HYUNDAI MOTOR AMERICA

NOTE:

Be careful not to wipe out coating (A) around the shaft.

If the coating is removed, poor idling control can be caused by excessive air leakage or foreign materials in the bearing of the shaft.

Courtesy of HYUNDAI MOTOR AMERICA

After cleaning it, reinstall the ETC Module and perform ETC Module Learning Procedure.
(Refer to Engine Control System - "ETC MODULE LEARNING PROCEDURE ")