LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2018 >> G80 3.8, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
    NOTE:
    • Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.

    [Bank 1/Sensor 1] 

    G12657637Courtesy of HYUNDAI MOTOR AMERICA
    G12657638Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 1/Sensor 2] 

    G12657639Courtesy of HYUNDAI MOTOR AMERICA
    G12657640Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 2/Sensor 1] 

    G12657641Courtesy of HYUNDAI MOTOR AMERICA
    G12657642Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 2/Sensor 2] 

    G12657643Courtesy of HYUNDAI MOTOR AMERICA
    G12657644Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals