Repair Procedures: Installation
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur if the component drops. In this case, inspect it before installation.
- Be sure not to apply oil or lubricant to the end of the hoses when connecting the PCSV hose.
CAUTION:
- Be careful of foreign materials not to flow into the valve.
- To install, reverse the removal procedure.
Purge Control Solenoid Valve Bracket Installation Bolt : 7.8 - 11.8 N.m (0.8 - 1.2 kgf.m 5.8 - 8.7 lb-ft)