Engine Control System
ENGINE CONTROL SYSTEM TIGHTENING TORQUE SPECIFICATIONS
| Item | kgf.m | N.m | lb-ft |
|---|---|---|---|
| ECM installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| ECM bracket installation bolt/nut | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Engine coolant temperature sensor installation | 2.0 - 4.0 | 19.6 - 39.2 | 14.5 - 28.9 |
| Manifold absolute pressure sensor installation bolt | 0.8 - 1.2 | 7.8 - 11.8 | 5.8 - 8.7 |
| Crankshaft position sensor installation bolt | 0.7 - 1.0 | 6.9 - 9.8 | 5.1 - 7.2 |
| Camshaft position sensor (Bank 1/Intake) installation bolt | 0.7 - 1.0 | 6.9 - 9.8 | 5.1 - 7.2 |
| Camshaft position sensor (Bank 1/Exhaust) installation bolt | 0.7 - 1.0 | 6.9 - 9.8 | 5.1 - 7.2 |
| Camshaft position sensor (Bank 2/Intake) installation bolt | 0.7 - 1.0 | 6.9 - 9.8 | 5.1 - 7.2 |
| Camshaft position sensor (Bank 2/Exhaust) installation bolt | 0.7 - 1.0 | 6.9 - 9.8 | 5.1 - 7.2 |
| Knock sensor #1 (Bank 1) installation bolt | 1.6 - 2.4 | 15.7 - 23.5 | 11.6 - 17.4 |
| Knock sensor #2 (Bank 2) installation bolt | 1.6 - 2.4 | 15.7 - 23.5 | 11.6 - 17.4 |
| Heated oxygen sensor (Bank 1/sensor 1) installation | 3.6 - 4.6 | 35.3 - 45.1 | 26.0 - 33.3 |
| Heated oxygen sensor (Bank 1/sensor 2) installation | 3.6 - 4.6 | 35.3 - 45.1 | 26.0 - 33.3 |
| Heated oxygen sensor (Bank 2/sensor 1) installation | 3.6 - 4.6 | 35.3 - 45.1 | 26.0 - 33.3 |
| Heated oxygen sensor (Bank 2/sensor 2) installation | 3.6 - 4.6 | 35.3 - 45.1 | 26.0 - 33.3 |
| Rail pressure sensor installation | 3.0 - 3.5 | 29.4 - 34.3 | 21.7 - 25.3 |
| CVVT oil temperature sensor installation | 1.5 - 2.2 | 14.7 - 21.6 | 10.8 - 15.9 |
| Electronic throttle body installation bolt | 0.8 - 1.2 | 7.8 - 11.8 | 5.8 - 8.7 |
| Purge control solenoid valve bracket installation bolt | 0.8 - 1.2 | 7.8 - 11.8 | 5.8 - 8.7 |
| Variable force solenoid (Bank 1/Intake) installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| CVVT oil control valve (Bank 1/Exhaust) installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Variable force solenoid (Bank 2/Intake) installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| CVVT oil control valve (Bank 2/Exhaust) installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Variable intake solenoid valve installation nut | 0.8 - 1.2 | 7.8 - 11.8 | 5.8 - 8.7 |
| Ignition coil installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Ignition coil condenser installation bolt | 1.0 - 1.2 | 9.8 - 11.8 | 7.2 - 8.7 |
| Fuel pump resister installation bolt | 0.8 - 1.2 | 7.8 - 11.8 | 5.8 - 8.7 |