LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2018 >> G80 3.8, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the mounting nut (C) after removing the top cap (B).
  4. Remove the mounting bolt (E) after removing the Lower cap (D).
    G12657671Courtesy of HYUNDAI MOTOR AMERICA
    G12657672Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals