LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2018 >> G80 3.8, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then vertically remove the sensor from the transaxle housing.
    G12657616Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals