LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2019 >> G70 3.3T Design, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Adjustment >> ETC Module Learning Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ETC Module Learning Procedure

Be sure to perform the ETC module learning procedure when replacing or re-installing the ETC module.

  1. Wait for 1 minute with the ignition switch ON.
  2. Start the engine and hold the idle status for 15 minutes.
  3. Waif for 1 minute with the ignition switch OFF.
  4. Restart the engine, check that the idle speed is stable.
NOTE:
  • Failing to perform the ETC module learning procedure after replacement or reinstallation may lead to MIL illumination with DTCs.
scientia non olet · About LEMON Manuals