LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2019 >> G70 3.3T Dynamic, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 2/Intake]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[Bank 2/Intake]

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the engine cover.

    (Refer to Engine Mechanical System - "ENGINE COVER ")

  3. Disconnect the camshaft position sensor connector (A).
  4. Remove the camshaft position sensor after loosening the mounting bolt (B).
G13543318Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals