Repair Procedures: Installation
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur if the component drops. If the component drops, inspect it before installation.
CAUTION:
- Apply the engine oil to the O-ring.
CAUTION:
- Insert the sensor in the installation hole and be careful not to damage during installation.
CAUTION:
- Be careful not to damage the sensor housing and the connector.
- Be careful not to damage the O-ring.
- To install, reverse the removal procedure.
Camshaft Position Sensor Installation Bolt:
6.9 - 9.8 N.m (0.7 - 1.0 kgf.m, 5.1 - 7.2 lb-ft)