Repair Procedures: Inspection
- Connect the diagnostic tool on the Data Link Connector (DLC).
- T Switch "ON" the ignition.
- Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
| Accelerator Position |
Output Voltage (V) [Vref = 5 V] |
| APS1 |
APS2 |
| C.T |
0.7 - 0.8 |
0.33 - 0.43 |
| W.O.T |
3.99 - 4.23 |
1.94 - 2.18 |