Repair Procedures: Removal
- Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
- Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
- Disconnect the EWGA connector .
- Remove the exhaust manifold heat protector.
(Refer to Engine Mechanical System - "EXHAUST MANIFOLD ")
- Remove the shaft link assembly after removing the C-ring .
- Remove the EWGA after removing the bolts .
CAUTION:
- When carrying the turbocharger, do not hold the rod of the turbocharger to prevent bending the rod.