LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> G70 2.0T, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Electronic Throttle Control (ETC) System >> Repair Procedures >> Adjustment >> ETC module learning procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ETC module learning procedure

Be sure to perform the ETC module learning procedure when replacing or reinstalling the ETC module.

  1. Wait for 1 minute with the ignition switch ON.
  2. Start the engine and hold the idle status for 15 minutes.
  3. Wait for 1 minute with the ignition switch OFF
  4. Restart the engine, and check that the idle speed is stable.
NOTE:
  • If the ETC module learning procedure is not performed after replacing or reinstalling it, MIL illumination with DTCs may occur.