LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> G70 2.0T, RWD, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column Module >> Steering Column Module (SCM) >> Repair Procedures >> Removal And Installation >> Steering Column Module (SCM) Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column Module (SCM) Switch

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Disconnect the steering column module connector.

    (Refer to Body - "STEERING COLUMN SHROUD PANEL ")

  4. Disconnect the steering module switch connector and clip.
    G14176752Courtesy of HYUNDAI MOTOR AMERICA
  5. Using the driver, remove the steering column module switch.
    G14176753Courtesy of HYUNDAI MOTOR AMERICA
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals