LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> G70 3.3T, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Oil Pressure Sensor (OPS) >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

  1. Switch "OFF" the ignition.
  2. Disconnect the OPS connector.
  3. Remove the OPS.
  4. After immersing the thermistor of the sensor into engine coolant, measure resistance between the OPS terminals 2 and 4.
  5. Check that the measurement is within the specification.
    Pressure (Bar) Output Voltage (V) [Vref=5V]
    0 0.5
    5 2.5
    10 4.5
scientia non olet · About LEMON Manuals