LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 4WD Control System Diagnosis >> DTC P3102-00: Control Module - Control ASIC Overtemperature >> DTC Information And Inspection >> Visual Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Visual Check

  1. Turn the ignition switch ON.
  2. Connect to the GDS and clear the DTC.
  3. Turn the ignition switch OFF.
  4. Connect and set the vehicle to "Vehicle Lift" and lift it safely.
  5. Check the installation of 4WD ECU if it is clogged (contaminated) by dirt or leaves: Such as foreign substance around connector.

    If it is, clear them.

  6. Keep the engine ON.
  7. If DTC returns, replace 4WD ECU (X Refer to the procedure of replacing 4WD ECU)

    * (Replacing 4WD ECU) S/W Management: Back-up/input learning value and conduct "TC Clutch Calibration".

scientia non olet · About LEMON Manuals