System STATES in LEARNING MODE
In learning mode, the BES System can be set in 6 different states, depending on the status of the terminals and Engine status:
| System State | Terminal Status | Engine status |
|---|---|---|
| 1. OFF - Locked | OFF | Stopped |
| 2. OFF - Unlocked | OFF | Stopped |
| 3. ACC | ACC | Stopped |
| 4. IGN | IGN1, IGN2, ACC | Stopped |
| 5. Start | IGN1, Start | Cranking |
| 6. IGN - Engine | IGN1, IGN2, ACC | Running (means "self-running") |
Referring to the terminals, the system states described in the table above are the same as those found in a system based on a mechanical ignition switch.
One of the features distinctive from the Mechanical Ignition Switch-based system is that the BES system allows specific transition from [OFF] to [START] without going through [ACC] and [IGN] states.