Repair Procedures: Installation
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
NOTE:
- When cleaning the throttle body, clean the valve and carbon at the bore with the cloth wetted by cleaner.
CAUTION:
- Do not spray the engine cleaner on the throttle body.
CAUTION:
- Be careful that fingers or cloth are not caught in the valve.
- When installing the throttle body, be careful not to get foreign material into the throttle body.
- Install in the reverse order of removal.
Electronic throttle body Installation bolt:
7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.8 - 7.2 lb-ft)