LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> GV80 3.5T >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.5L >> Variable Force Solenoid (VFS) >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

NOTE:
  • If the Variable Force Solenoid valve (VFS) is dropped, do not reuse it.
  • When installing the Variable Force Solenoid valve (VFS), pay attention to the below instructions.

  1. Replace the Variable Force Solenoid valve (VFS) O-ring (A) with a new one and then apply engine oil to the new O-ring (A).
    G14728759Courtesy of HYUNDAI MOTOR AMERICA
  2. Push the Variable Force Solenoid valve (VFS) until it reaches the end of the timing chain cover mounting face and then provisionally tighten the bolts.
  3. Tighten the Variable Force Solenoid valve (VFS) to the specified torque.
  1. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals