Power Trunk Lid Control Unit: Installation

Install the power trunk Lid control unit.
Tightening torque:

4.9 - 7.8 N.m (5.0 - 8.0 kgf.m, 36.2 - 57.9 lb-ft)
Install the luggage side trim [LH].
Connect the negative (-) battery terminal.
NOTE:
- Make sure that the connectors are plugged in properly.
- Check that the power tailgate operates normally.
CAUTION:
- Always check for normal operation when a power trunk module related part is changed.
- When abnormal system operation is found, check the DTC Code and the connection of the wiring and cable.