POWERLINE Communication Module Diagnosis
- Component Location And Function
- High Speed CAN Communication
- Check When Charging Is Not Possible
- DTC Information And Inspection
- Check The Charging System
- Check Charging Warning
- Checking The Vehicle Condition Related To Charging
- Proximity Detection (PD) Signal Check
- Proximity Detection (PD) Signal Current Data Check (Disconnected The Charging Connector)
- Proximity Detection (PD) Signal Sensor Data Check (Connected The Charging Connector)
- Checking The Charging Cable (Charging Connector)
- Charging Terminal Ground (GND)
- Proximity Detection (PD) Circuit Signal Line Diagnosis Resistance Measurement
- Proximity Detection (PD) Signal Inspection
- Inlet Locking Device Check
- Control Pilot (CP) Signal Inspection
- Verification Of Repair
- DTC Information And Inspection
- DTC B2211-87: CAN Time-Out BMS
- DTC C160E-88: P-CAN Bus OFF
- DTC C182B-00: PLC PHY Failure
- DTC C182C-00: EVSE Failure
- DTC C183F-00: PLC Signal Failure
- DTC C1865-87: CAN/PLC Time-Out PCM
- DTC C186E-00: PnC Failure
- DTC C186F-00: HSM Failure
- DTC U130E-87: Lost Communication With Vehicle Charging Management System (VCMS)
- DTC U130F-87: DC EVSE Communication Error