Repair Procedures: Removal
- Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
- Remove the air cleagner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
- Disconnect the EWGA connector .
- Remove the exhaust manifold heat protector.
(Refer to Engine Mechanical System - "TURBOCHARGER, EXHAUST MANIFOLD AND CATALYTIC CONVERTER ")
- Remove the shaft link assembly after removing the C-ring .
- Remove the EWGA after removing the bolts
.CAUTION:
- When carrying the turbo charger, do not hold the rod of the turbo charge to prevent bending the rod.