Removal And Installation

Switch "OFF" the ignition and disconnect the battery negative (-) terminal.
Remove the air cleaner.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Disconnect the RCV control solenoid valve connector (A), RCV hoses (B).
After installing bolt, remove the RCV control solenoid valve.
Tightening torque:

9.8 - 11.7 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.6 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.