Throttle Position Sensor (TPS): Adjustment
If resistance values are incorrect, loosen TPS hold-down screws and slowly rotate TPS until correct specification is obtained. If correct specification can not be obtained, replace TPS.
THROTTLE POSITION SENSOR (TPS) RESISTANCE
| Application Condition | Resistance (Ohms) | ||
|---|---|---|---|
| Green & Black/White Wire | |||
| Throttle 1/3 Open | No Continuity | ||
| Throttle Open: | |||
| A/T .015" (.38mm) | Continuity | ||
| M/T .011" (.28mm) | Continuity | ||