Engine Stalls: Carbureted

Check carburetor choke vacuum source.
Ensure correct choke adjustment and linkage operation.
Verify hot air tube is connected to air cleaner.
Ensure fuel level is at specified mark on carburetor sight glass.
If vehicle stalls only when A/C is on, ensure ECM terminal "J" has battery voltage when A/C is operating.
Ensure A/C system is not overcharged.
Check idle control operation.
Check idle mixture adjustment.
Check accelerator pump operation.
Ensure there are no vacuum leaks.
Check PCV operation by clamping hose shut. If problem discontinues, replace PCV valve.
Check EGR system and ensure valve closes completely.
Check Early Fuel Evaporation (EFE) operation.
Check throttle position sensor adjustment.
Check coolant temperature sensor operation.
Check for overheating problems.
Check for poor quality or contaminated fuel. Check for use of fuel with high alcohol content.